How to control the fork descent speed of the hand pallet truck BF Classic?

The fork descent speed control of the hand pallet truck BF Classic is mainly carried out in the following ways:

hand control: When the operator needs to raise the fork to load or move the goods, the hand control lever should be placed in the "raise" position. Usually, the operator needs to pull back or push the control lever upward to put it into the "raise" mode. At this time, the hydraulic system of the pallet truck starts to work and drives the fork to move up until it reaches the required height. Once the goods are loaded on the fork and need to be moved to a new location, or the goods need to be unloaded from the fork, the operator needs to put the hand control lever in the "lower" position. This operation usually involves pushing forward or pressing down on the control lever to put it into the "lower" mode. In this mode, the hydraulic system of the pallet truck is activated again, but this time it drives the fork to move downward. The operator can accurately control the descent speed of the fork through the fine adjustment function on the control lever to ensure that the goods are smoothly and safely lowered to the ground or other equipment. The neutral position is an intermediate position of the hand control lever, which is used to lock the system when the fork does not need to be raised or lowered. When the operator puts the control lever in the "neutral" position, the hydraulic system stops working and the fork remains in its current position. This prevents the fork from accidentally rising or falling without operation, improving the safety of the entire handling process. When operating the BF Classic hand pallet truck, the operator should always pay attention to the stability and safety of the cargo. Before moving the cargo, make sure that the fork is properly placed under the cargo and that the cargo is securely fixed to the fork. In addition, during operation, sudden or excessive force should be avoided to avoid damage to the pallet truck or the cargo.
Pedal operation: The foot pedal of the BF Classic hand pallet truck is usually designed near the operator's standing position, which is convenient for the operator to step on at any time. The foot pedal usually has an anti-slip design to ensure that the operator's feet can be stably stepped on the pedal during operation to prevent sliding or accidental foot removal. The foot pedal is connected to the hydraulic system of the pallet truck. When the operator steps on the foot pedal, the hydraulic system receives a signal and starts to drive the fork down. There is a certain correlation between the pedaling force of the foot pedal and the descending speed of the fork. The operator can control the descending speed of the fork by adjusting the pedaling force.
Speed ​​control features: The controllability of the fork descent speed allows the operator to accurately adjust the fork descent speed according to the characteristics and handling requirements of different goods. For fragile or sensitive goods, the operator can slowly lower the fork to reduce the impact and vibration of the goods, thereby protecting the integrity and safety of the goods. For goods that are heavy or need to be placed quickly, the operator can speed up the fork descent speed to improve the handling efficiency. Secondly, by accurately controlling the fork descent speed, the goods can be prevented from being subjected to severe collisions and friction during the handling process. This precise control can ensure that the goods are in more stable contact with the ground or other equipment when placed, reducing the risk of damage caused by impact and friction. This is especially important for valuable goods or goods that require special protection, which can effectively reduce the risk of damage to the goods and reduce the economic losses caused by damage to the goods. In addition, the controllability of the fork descent speed can also improve the safety and operating experience of the operator. The operator can adjust the fork descent speed according to his own operating habits and comfort, making the handling process smoother and easier. At the same time, precise control of the fork descent speed can also reduce the risk of safety accidents caused by improper operation or mistakes, and ensure the safety of the operator.
Note: When controlling the fork descent speed, the operator should always pay attention to the stability and safety of the goods. Avoid sudden or excessive force operations to avoid damage to the pallet truck or the goods.
In summary, the typical fork descent speed control of the hand pallet truck BF is mainly achieved through the hand control lever and foot pedal. The operator can adjust the descent speed according to actual needs to ensure that the goods are placed safely and smoothly.