英语
西班牙语
德语
法语
俄语
Electric Pallet Truck
Electric Stacker
Order Picker
Narrow Aisle Truck
Tow Tractor
Electric Forklift
Lithium-ion Truck
Hand Pallet Truck
Manual Stacker
Lift TableEquipment such as forklifts have been used for a long time, and tire wear can directly affect the work efficiency. What are the ways to prevent electric forklift tires from wearing? There are many people who pay more attention to this aspect, so as to be able to do a good job in prevention and ensure the reliability of the operator's life. The specific method is as follows:
1. Strengthen the maintenance of tires and achieve "four diligence", that is, frequently check the air pressure, frequently check the tire temperature, frequently dig stones, and frequently plug small holes.
2. Improve the maintenance quality of the chassis
Check and correct the wheel alignment in time to ensure that the toe-in and camber angles meet the design requirements; check the rim for cracks, deformation and obvious corrosion, if so, repair or replace the rim in time to ensure that the rim matches the tire; timely Add grease according to regulations and adjust the clearance of wheel hub bearing, tie rod ball joint and king pin bushing to the design value; keep the balance of the tire, if it is unbalanced, carry out the dynamic balance test of the wheel; Determine whether oil has entered the tire. Once oil has entered the tire, the tire should be removed and cleaned immediately. The lateral and radial swing of the wheel assembly should meet the requirements.
3. Improve driving skills
When starting, lift the clutch pedal slowly and start smoothly; when driving, the high speed per hour should not exceed the speed limit of the tire level; during driving, try to avoid sudden acceleration, sudden braking and sudden steering. When driving, pay attention to thick, sharp and sharp materials scattered on the road. When encountering obstacles such as rocks and potholes, you should slow down to pass or avoid them.
4. Reasonable selection and matching of tires
The tire size of the forklift should be determined according to the static load generated by the forklift's own weight and cargo weight and the dynamic load generated when the forklift is running, and taking into account the factors of road surface and vehicle speed; the tire should be installed on the rim of the specified specification; the same axle should be equipped with the same product , specifications, patterns and layers of tires; when changing tires, the entire vehicle should be replaced coaxially.
5. Pay attention to the balance of cargo loading and prevent the tire from being overloaded. The method of increasing the tire pressure cannot be used to compensate for the overload of the tire.
