NINGBO RUYI CQD series reach forklift is powered by storage battery, and driven by DC/AC motor. Truck travels by means of gear drive. The fork is lifted by means of DC motor and hydraulic actuation, which motivate hydraulic cylinder up and down to lift fork and goods together. Mast can incline both forward and backward, and can realize fore-and-aft movement as well, which make operation more convenient and flexible. The forklift possesses many characteristics, such as flexibility, high efficiency, stability in operation, simple and easy operation, safety and reliability, little noise, environmental friendly, etc. This truck adopts 48V large capacity battery cell, which greatly extends service time within one charge.

The reach forklift is applicable to goods stacking and transportation on hard and flat ground.

Operating environment:

1. Height above sea level shall not exceed 1200m;
2. Ambient air temperature shall not be above +40℃nor below -25℃;
3. Under an environmental temperature of +40℃, relative humidity shall not above 50%; with a lower temperature, a larger relative humidity is allowable.
4. Hard and flat ground.
5. It is forbidden to use the truck in inflammable, explosive environment, or in corrosive environment such as acid or alkali environment.

 

Please pay attention to the following items first before operation of the forklift:

1) Electric forklift is limited to utilization indoor with a hard flat floor. Operation in inflammable, explosive environment or corrosive environment such as acid or alkaline condition shall be strictly forbidden.

2) Only drivers who have received formal training or are authorized can be allowed to drive the forklift.

3) Read this instruction carefully before operation so as to master the performance of the forklift; check the truck whether it is in its normal condition before each operation. It is forbidden to use faulty forklift; repaired by untrained persons is forbidden as well. 

4) Overloading operation is forbidden. Loading capacity and lifting height shall be in accordance with load curve.

5) As for stacking, center of gravity of the goods must be within range of the two forks. It is forbidden to stack loose goods

6) The forklift shall travels slowly when forks pass in or out of goods shelf. Sudden start or emergency brake is forbidden. It is forbidden to turn within range of the goods shelf. Slowly movement in straight way must be promised.

7) The forklift must slow down in case of cornering. An abrupt turn is strictly forbidden during fast travel.

8) The fork must be lowered below 1m in case of turning. High-lever turning is strictly forbidden.

9) Ground clearance of the fork shall be not in excessive of 0.5m in case of long-distance carriage. And the mast shall be retracted with a small tilt angle backward for purpose of stabilization of the goods.

10) Fore-and-aft movement mast shall be operated in a slow way if there are goods on the forks. An abrupt push or pull of the fore-and-aft movement operating handle is prohibited.

11) Never stand on fork arms or pass across below the fork arms, or around the truck when stacking the goods.

12) It is strictly forbidden to operate with people standing on the forks.